POE30G-AT

Description

Gigabit Power Injector PoE AF/AT 30W, Active
1-port Gigabit PoE injector. Standard 802.3af, 802.3at, max. 30W power supplied 48V. Transmission speed up to 10/100/1000 Mbps FD. Automatic detection of PD.

Description 
The Gigabit PoE injector PoE30G-AT can realize synchronous delivery of device network data and power via one Ethernet cable (Cat.5e or better). The max. output power is 30W, which can serve as an outlet for a PoE device (powering via RJ45 port). You can connect PoE30G-AT to an IEEE802.3af/at compliant PD, such as wireless AP,  VoIP phone, IP camera, web cam, etc. It eliminates the need for the availability of electrical outlets in the vicinity of the active device. In a sense, it is a good choice for you to reduce the installation cost and improve the network performance.

Main Features
• PoE ports supports IEEE802.3at and IEEE802.3af standard
• Equipped with gigabit port, blazing-fast transfer rate, maximum transfer rate of up to 30W for single port
• Power distance extension of up to 100 meters for standard Cat5e and Cat6 Ethernet cable
•  Plug and play, no any configuration required

Specifications 
• Standards:  802.3af, 802.3at, 802.3, 802.3u, 802.3ab
• Baud Rate: 10/100/1000 Mbps full-duplex
• Method of control: without management
• Network functions: automatic detection of PD devices
• Interface: 1x GbE LAN (PoE IN), 1x GbE LAN (PoE + Data OUT)
• Type: indoor
• Housing material: plastic
• Power Input: 230 VAC
• Power Output: 48V DC, 30W
• Consumption: 2.2W
• Cooling: passive
• Operating temperature: 0° to 40°C

Package 
• 1x Tenda PoE30G-AT
• 1x Quick Installation Guide
• 1x Power Cord

Tenda