PLC-SCA16

Description

PLC-SCA16 – PLC Splitter 1×16 Blockless, SC/APC Pigtails with SC/APC Couplers, 900μm Fiber, Length: 1m
 
Optical splitter 1×16, wavelength 1260-1650 nm, typical insertion loss 13.8 dB
 
PLC Splitter 1×16 Blockless (Mini Steel Tube), SC/APC Pigtails, 900μm Fiber, Length: 1m
 
Included are 16pcs SC/APC to SC/APC Green Adapter with Flange, Simplex Singlemode 9/125 Female to Female Fiber Optic Coupler

Description:
This optical splitter divides the optical signal from the output of the optical transmitter into sixteen optical paths. The splitter can be used in any Pons (Passive Optical Networks). They are one of the most important items for building FTTX network with P2MP type (Point to Multi-Point).

Blockless PLC splitter has stronger fiber protection than bare fiber splitter, which is a miniaturization result of cassette splitter. It’s mainly used for various connection and distribution boxes or network cabinets.

Fully Passive Optical Branching Device. Compact Housing Fits Racks, Wall-mounted Boxes, Optical Distribution Boxes, etc. Splits input signal evenly into 16 output ports.

The PLC Splitter can operate between 1260nm~1650nm  wavelengths of light power. This large distribution wavelength range covers EPON technology using 1310nm, 1490nm and 1550nm.

PLC stands for Planar Lightwave Circuit. PLC splitters are used to distribute or combine optical signals. It is based on planar light wave circuit technology and provides a low cost light distribution solution with small form factor and high reliability.

PLC Splitters have low sensitivity to curvature, they can be used with a smaller curvature radius, thanks to their fiber type, G.657A-BLI (Bending Low Insensitive), that does not change the attenuation level. With it’s compact size and smaller curvature radius, these splitters can be utilized in in-ground and aerial pedestals as well as rack mount systems. Splitters can be operated in reverse direction to combine multiple signals into one or two fibers.

Features:
PLC Splitter:
● Optical PLC 16 way splitter for singlemode fiber application
● Compact size
● Connectors: SC/APC
● Low insertion loss, Low PDL and High reliability
● High return loss and good repeatability
● Excellent channel-to-channel spectral and power uniformity
● Operating wavelength range: 1260-1650 nm
● G657A2 bend insensitive fibers for low bending loss
● Excellent Environmental Stability
● Excellent Mechanical Stability
● High channel counts
● Length: 1m

SC/APC Coupler:
● Quantity: 16pcs
● SC/APC-SC/APC 2.5 adapter polished type
● Used with Simplex Singlemode connectors
● With Flange
● 2pcs Protective Design Dust Caps: Prevents the adapter from dust and keeps it clean
● Stainless Steel Clips: Allow for easy snap-in installation without tools
● Color Coded Green for Rapid Fiber Management
● Connector One: SC Jack
● Connector Two: SC Jack
● 1310nm Insertion Loss: ≤ 0.2dB
● 1550nm Insertion Loss: ≤ 0.2dB
● Interchangeability: ≤ 0.2dB
● Repeatability: ≤ 0.2dB
● Return Loss: > 50dB
● Mechanical Durability: ≥ 1000 mating cycles
● The alignment sleeves are made of ceramic / phosphor bronze
● Ferrule material: ceramic
● Operation temperature: -25~+70°C
● Storage temperature: -40~+85°C
● Fast and easy connection
● Lightweight and durable plastic housing
● Low insertion loss with high-precision alignment
● High reliability and durability
● High precision mechanical dimensions

Applications:
● LAN, WAN and Metro Networks
● FTTH project & FTTX Deployments (GPON/BPON/EPON)
● CATV System
● Passive optical networks (PON)
● Fiber Optic Test Equipment
● Data-base Transmit Broadband Net
● Install in Fiber Optic Distribution Terminal Boxes

VISIONNET