SCAM-SCUF

Description

SCAM-SCUF – SC/APC to SC/UPC Hybrid Adapter without Flange, SX SM Fiber Optic Coupler
 
SC/APC to SC/UPC Hybrid Adapter without Flange, Simplex Singlemode 9/125 Male to Female Fiber Optic Coupler
 
SCAM-SCUF – This adapter is designed to convert SC/APC to SC/UPC connections, providing versatility in fiber optic installations
 
Description:
This SA/UPC male to SC/UPC female Singlemode 9/125 Fiber Optic Hybrid Adapter, is a mating sleeve that is designed for connecting and coverting a cable with a 2.5mm hole SC/APC female connector to a cable SC/UPC male connector.

SC/APC to SC/UPC Hybrid Adapter Singlemode Simplex Fiber Optic Coupler Female to Female has a low 0.2dB insertion loss. The combination of a zirconia ceramic alignment sleeves and a precision metal housing provides consistent long-term mechanical and optical performance.

Fiber optic adapter, sometimes also called coupler, is a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines. By linking two connectors precisely, fiber optic adapters allow the light sources to be transmitted at most and lower the loss as much as possible. At the same time, fiber optic adapters have the merits of low insertion loss, good interchangeability and reproducibility. it is widely applied in cable television network, LAN & WAN, fiber optic access network and video transmission.

The fiber optic adapter or coupler is designed to mate two ends of the fiber optic cable with high precision. The adapter uses a simple design: the ends of two separate fiber optic cables with fiber optic connectors fit into two slots opposite each other. The slots are comprised of a polymer or metal outer body and inner assembly fitted with a precision alignment mechanism to precisely align the two ends so that there is minimal to signal loss. It provides a great solution to meet the growing demand for small form factor, high-density fiber optic connectivity. The compact design enables network operators to reduce cost via space-savings, and by eliminating hybrid cable assemblies.

Additional useful information:
Adapters are designed for multimode or singlemode cables. The singlemode adapters offer more precise alignment of the tips of the connectors (ferrules). It is ok to use singlemode adapters to connect multimode cables, but you should not use multimode adapters to connect singlemode cables. This can cause misalignment of the small singlemode fibers and loss of signal strength (attenuation).
 
When connecting two multimode fibers, you should always make sure they are the same core diameter (50/125 or 62.5/125). A mismatch here will cause attenuation in one direction (where the larger fiber is transmitting light into the smaller fiber).
 
Fiber optic adapters are typically connecting cables with similar connectors (SC to SC, LC to LC, etc.). Some adapters, called “hybrid”, accept different types of connectors (ST to SC, LC to SC, etc.). When the connectors have differing ferrule sizes (1.25mm to 2.5mm), as found in LC to SC adapters, the adapters are significantly more expensive because of a more complicated design/manufacturing process.
 
Most adapters are female on both ends, to connect two cables. Some are male-female, which typically plug into a port on a piece of equipment. This then allows the port to accept a different connector than for which it was originally designed. We discourage this use because we find the adapter extending from the equipment is subject to being bumped and breaking. Also, if not properly routed, the weight of the cable and connector hanging from the adapter may cause some misalignment and a degraded signal.
 
Extending Fiber Connection with Adapters
With high-precision components and tool-less design, the adapters allow two devices to communicate from a distance through a direct connection with the fiber optic line

Dust Cap
Prevents the adapter from dust and protects from debris
 
Stainless Steel Clip
Allow for easy snap-in installation without tools
 
Zirconia Ceramic Sleeve
Low insertion loss with high-precision alignment
 
Color-coded Adapters Simplify Fiber Management
The adapter housing colors follow the TIA/EIA-568-C.3 suggested color identification scheme, effectively helping technicians make better cable management and reduce human errors. They come is 5 color options to indicate the fiber type as following: Single Mode adapters come in Blue for UPC or Green for APC and Multi Mode adapters come in Beige for OM1/OM2, Aqua for OM3 and Violet for OM4.
*Note: Adapters may be specially ordered in other colors depending on the color management needed, e.g all adapters used might be LC/APC but ordered in different colors for better management.

Features:
● SC/APC-SC/UPC 2.5 adapter polished type
● Used with Simplex Singlemode connectors
● Mounting Type: No Flange
● Footprint: SC Simplex / LC Duplex
● 2pcs Protective Design Dust Caps: Prevents the adapter from dust and keeps it clean
● Color Coded (Blue/Green) for Rapid Fiber Management
● Body Style: Simplex
● Connector 1: SC/APC Plug
● Connector 2: SC/UPS Jack
● 1310nm Insertion Loss: ≤ 0.2dB
● 1550nm Insertion Loss: ≤ 0.2dB
● Interchangeability: ≤ 0.2dB
● Repeatability: ≤ 0.2dB
● Return Loss UPC: ≥ 50dB
● Return Loss APC: ≥ 60dB
● Mechanical Durability: ≥ 1000 mating cycles
● Housing material: metal
● The alignment sleeves are made of zirconia ceramic
● Ferrule material: ceramic
● Operation temperature: -40~+85°C
● Storage temperature: -55~+95°C
● Fast and easy connection
● Low insertion loss with high-precision alignment
● High reliability and durability
● High precision mechanical dimensions
● Materials compliant to RoHS

Applications:
It is used to connect two fiber optic cables with SC (Square Connector), one with APC (Angled Physical Contact) connector and the other with UPC (Ultra Physical Contact) connector. It can be used with fibre optic patchcords, which send high-speed data through a network. The adapter is a part of optical path, it guarantees stability of transmission parameters, and high quality ceramic ferrule, that is polished at one end at an 8-degree angle (APC) and the other at a 0-degree angle (UPC, in fact it has a slightly curves end face so that the fiber cores make contact first), assures lower return loss. Simplex cables with this adapter, are used in cable ducts, cubicles and pipes with low mechanical pressure.

SC connectors are mostly used in telecommunication. It is also used in active equipment such as video converters and media. It ensures easy, quick connection and it is resistant for connection defects. The shape of connector assures easy and stable assembly. Beside usage in telecommunication, SC connector is also used in LAN, WAN and CATV networks, measuring techniques and on the railway.

● Telecommunication Networks
● Local Area Networks (LANs)
● Communication System
● Premise Installations
● Wide Area Networks (WANs)
● Network monitoring points
● Connections between patch cords, patch panels
● FTTX, ODF (optical distribution frame)
● Connections Between Devices
● Data centres
● Gigabit ethernet
● Video Transmission
● CATV network
● Active device/Transceiver interface
● Multimedia
● Metro networks
● Industrial and military
● Mounting on to distribution boxes or wall sockets
● Fiber Testing/measurement instruments

SUMMIT